How To and Product Review – Strait Flex Uno-Bead

June 25, 2018 By

Strait Flex Uno-Bead - Corner bead on a roll

Strait Flex Uno-Bead – Corner bead on a roll


In this product review and demonstration video, I will be using the Strait flex Uno-Bead for the first time ever. This will enable you to see how easy the Strait Flex Uno-Bead is to work with without ever have used it before. Or what might be a bit of a learning curve when it comes to using a product you have never used before. Thanks for watching and if you have any questions about the Strait Flex Uno-Bead please feel free to ask me in the comments section of my video on Youtube.

I’ll be replacing the old corner bead from a closet modification with the Strait Flex composite corner bead on a roll. The closet had already been taken apart by the homeowner that had just purchased this home.The plan was to make a computer/gaming area for their son where the closet was. Since their new to them home was having several remodeling projects going on anyways they wanted to have me take care of this extra job while I was there.

My conclusion after trying Uno-Bead for the first time on this remodeling project is that whether you’re a contractor, handyman or even a home improvement DIY’er. This product will be a fast and easy way to install corner bead on new drywall and drywall repairs. And the Strait Flex Uno-Bead is much stronger the traditional corner beads which means it’s great for drywall corners in high traffic areas.

Another benefit is Uno-Bead requires less joint compound than the traditional metal corner bead or vinyl corner bead. Which speeds up drying time as well. So you can save time, the amount of materials needed to finish outside 90 degree drywall corner. All of this means you make more money while also getting a better and stronger end result. Also since this corner bead product comes on a roll, it’s easily stored eliminating the need to have a special place to store it from getting damaged before getting to the job where you’ll be doing your drywall finishing.

I would definitely use Strait Flex Uno-Bead Again again!

Here some stats about Strait Flex Uno-Bead 222:

  • This composite corner bead provides outside 90 degree corners for drywall, plaster and EIFS applications and perfectly replaces damaged metal corner bead.
  • Works on all inside and outside corners
  • Drywall, thin coat plaster, EIFS and kitchen remodels, bathroom remodels, home renovations and new construction.
  • High traffic areas where bumps and dents commonly occur.
  • Reduces waste and is easily transported.
  • Uno-Bead 222 is sized to be a permanent replacement to damaged corner bead.
  • Installs using all standard methods: Drywall compound, Plaster, EIFS, glue, staples, nails or screws.
  • Available in 2.22″ and 3″ widths.
  • Mold proof, Rust proof and Alkali resistant.
  • Slots insure quick drying time and unmatched bonding strength.
  • PVC/Nylon composite material ensure straight corners every time and prevents mold and rust.
    • Filed Under: Blog Post's, Do It Yourself, Drywall, Drywall Finishing, Drywall Repair, Home Improvement, Home Repair, How to, Orange Peel Texture, Product Demonstration, Product Review

    Cool Drywall Tool Review and Demonstration- Drywall Cutting Can Lights

    December 16, 2015 By

    In this drywall tool review and demonstration video I’ll show you how to use a can light drywall tool. It’s great for DIYers, handyman and even contractors will benefit from this must have magnetic drywall measuring and locating tool.


    The Center Mark by Calculated Industries is a great tool for marking and cutting the drywall around Can lights with a Roto Zip spiral cut saw. For remodels, new construction and ceiling repairs.


    No measuring required!


    The Center Mark is super easy to use!

  • 1) Simply screw in the magnetic post right in the can light before you put your drywall up


  • 2) Now put your drywall into position


  • 3) Next take the locator magnet and find magnetic post under the drywall before you make your cut


  • 4) Now plunge the Roto Zip or spiral cut saw into the drywall about an inch away from your Center Mark magnet toward you.


  • 5) Once you hit the metal rim of the can light, pull the cutting bit out.


  • 6) Now return the bit on the other side of the can light metal rim and follow the can light outer rim around the can light and you’re done!


    • My conclusion and drywall tool review after trying the Center Mark Drywall Tool for the first time. Is that whether you’re a DIY’er, handyman or even a remodeling contractor or drywall contractor. This product will be the fastest way and most precise way to marking and cutting the drywall around can lights on the new construction, remodels and home improvement projects.



    So with the Center Mark by Calculated Industries, You can save time and money by reducing the number of miscuts around can lights. All of this means you make more money while also getting a better end result.

    And did I mention that there is No Measuring Required!!

    The tools that I recommend precision marking and cutting are the Center Mark Drywall Tool for can lights and also the Blind Mark Magnetic Locator Tool for cutting out all sizes of electrical boxes.
    -~-Calculated Industries Center Mark Drywall Recessed Lighting Cutout Locator Tool-~- http://amzn.to/2kgNkrC
    -~-Calculated Industries Blind Mark Drywall Electrical Box Locator Tool-~- http://amzn.to/2kzlLWw

    For more Drywall Tool Review Videos, How To Videos and Project Videos
    Visit my –> Youtube Channel




    Filed Under: Drywall, drywall tool, drywall tool review, How to, Product Demonstration, Product Review